General-tools-and-instruments MMD7003 Manual de usuario descargar pdf (Pagina 2)

INTRODUCTION:

Congratulations on your purchase of this Digital and LED Precision

Moisture Meter. This unit detects moisture in wood and other building

materials such as brick, wall board, sheet rock, cardboard, paper,

plaster, concrete, and mortar.

FEATURES:

• Designed to check the moisture level of wood, concrete, and

other non-wood material

• Measures from 6% to 40% moisture in wood

• Measures 0% to 100% relative moisture value for concrete and

other non-wood material

• Measurements are shown on Red LED bargraph indicator and

LCD digital display

• All-In-One meter with build-in test pins

• Optional separate probe, available for remote moisture

measurement

• Microprocessor provides high accuracy and advanced features

such as MIN/MAX

• Data Hold feature freezes displayed reading

• Heavy duty and compact housing enhance portability and

durability

• Built-in low battery indicator

SPECIFICATIONS:

PRINCIPAL: Use the 2 pin electrodes to measure the conductive ability

of the species, then it converts to the reading of %

“Moisture of Content”

CIRCUIT: Custom one-chip of microprocessor LSI circuit

DISPLAY: LCD size: 51 mm x 37 mm

Digit size: 16 mm (0.62")

MATERIAL/RANGE:

Material 1: 0 to 100% relative moisture value for concrete and other

non-wood material.

Material 2: 6 % to 40 % moisture range on wood.

RESOLUTION: 0.1 %

ACCURACY: ± (5 % rdg + 5 digits)

@23±5°C

@Material 1: 13% to 100%

@Material 2: 6% to 40%

PROBE: 2 pins moisture electrode

ELECTRODE PIN LENGTH: 0.44" (11mm)

ELECTRODE PIN TYPE: Integrated, replaceable

OPERATING TEMPERATURE: 32º to 122ºF (0°to 50ºC)

1 2 3 4 5 6 7 8

Sin comentarios

General-tools-and-instruments MMD7003 Manual de usuario Pagina 2