General-tools-and-instruments HT50 v.1 Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Display Legend
: indicates reading is higher than high alarm setpoint
for that parameter
: indicates reading is lower than low alarm setpoint
for that parameter
%RH: relative humidity unit
°C: Celsius temperature unit
°F: Fahrenheit temperature unit
IRT: Indicates operation in IRT mode
Hold: Indicates that IRT measurement is being held on
the display
[-]888.8: Humidity or temperature value or one of the
following four working status indications
LOG: Unit is logging data
- - -: Unit is in standby mode, ready to log data
FUL: Internal memory is full (and logging has been
stopped)
CON: Unit needs to be configured by software
7
Fig. 1b. All possible
display indications
on the HT50
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentarios a estos manuales

Sin comentarios