General-tools-and-instruments DCS1700 v.1 Manual de usuario descargar pdf (Pagina 20)

The SETTINGS submenu

Submenu name Options Instructions/Comments

AUTO POWER OFF OFF (default) Choose OFF to disable the Auto Power Off

5 function (not recommended). Choose 5 or 10 to

10 automatically power off the DCS1700 after 5 or

10 minutes of inactivity on the keypad. When

your selection is highlighted, press the

button to save the setting and return to the

SETTINGS submenu.

RECORDING TIMER 0 (default) Choose 0 to never limit the duration of video

10 recordings. Choose another value to limit the

15 duration of video recordings to that value, in

20 minutes. When your selection is highlighted,

25 press the button to save the setting and

30 return to the SETTINGS submenu.

The Special Function menu that opens when you press the button provides access

to two display controls and the option to operate the display in either of two custom

modes.

The two display controls are for brightness and contrast. The controls let you establish

baseline levels of those two display attributes that remain in effect in both Preview and

Playback mode after you exit the Special Function menu and until you power off and on

again.

Note: Unlike the Main menu and its submenus, the display controls made available

through the Special Function menu must be manipulated within four seconds. If

you do not adjust the baseline level of brightness or contrast within four seconds,

the on-screen display control will disappear and you will have to start over, from

Preview mode, by pressing the button.

To set a baseline level for display brightness:

1. Enter the Special Function menu by pressing the button.

2. Use the or button to scroll down to and highlight the line.

3. Press the button

4. Use the and buttons to increase or decrease the display brightness, as

represented by the number of green bars in a horizontal row. The default baseline

level is represented by the blue bar in the middle of the row.

To set a baseline level for display contrast:

1. Enter the Special Function menu by pressing the button.

2. Use the or button to scroll down to and highlight the line.

3. Press the button

4. Use the and buttons to increase or decrease the display contrast, as

represented by the number of green bars in a horizontal row. The default baseline

level is represented by the blue bar in the middle of the row.

User Guide

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

General-tools-and-instruments DCS1700 v.1 Manual de usuario Pagina 20